🏆 瑞泰 RGT EX86130 FORD BRONCO 專業多功能雙速雙鎖門橋攀爬車
瑞泰傾力打造的 1/10 精密全比例旗艦級攀爬越野車。完美還原 FORD BRONCO 經典硬派越野硬漢線條，首度將「雙速波箱」、「前後獨立差速鎖」與「後橋 DIG 鎖止系統」極致融合，具備頂級全聯動仿真燈效，專為骨灰級攀爬玩家量身打造。
✨ 核心賣點與獨家設計
【全能多模式驅動】：支援前驅、4WD（全時四驅）及「前驅 + DIG 后橋鎖止」模式，提供極致微小的坦克轉向半徑，險境脫困更輕鬆。
【雙速機械變速波箱】：遙控器可直接切換高低速兩段變速，低速檔具備最高 57:1 超強扭力，高速檔則能肆意奔馳，一車雙重體驗。
【4 舵機硬核科技電裝】：全車內置 4 組專用 Servo，完美聯動轉向、雙速變速及前/後獨立差速鎖，搭配 25KG 金屬齒防水轉向舵機，掌控力無懈可擊。
【好盈專業防水電變】：標配 Hobbywing 1060 60A 專業有刷電變，完美支援 3S (11.1V) 鋰電池爆發，提供極其流暢細膩的拖煞阻尼與線性手感。
【全功能聯動燈光組】：出廠即配備最高規格模擬照明，包含仿真前大燈、前後聯動轉向燈、剎車燈及倒車燈，夜間攀爬視覺效果極致逼真。
【CNC 鋁合金油壓避震】：採用頂級 CNC 鋁合金油壓避震器（硬度可調），結合 73mm 底盤超高離地間隙與 55° 超大接近角，無視任何極限障礙。
📊 產品精密規格
車輛比例：1/10 專業全比例多功能四驅攀爬車 (RTR 版本)
動力馬達：550 級 35T 專用高扭力有刷馬達
電子變速器：Hobbywing 1060 60A 專業有刷電變 (最高支援 11.1V 3S LiPo)
主要舵機：25KG 金屬齒輪轉向 Servo / 25KG 360度金屬齒輪絞盤 Servo
全車舵機：全車共 4 隻舵機 (負責轉向、機械變速、前差速鎖、後差速鎖)
遙控距離：2.4Ghz 專業 6 通道同步遙控系統 (遙控距離約 100 米，防干擾)
變速齒比：低速檔 53:1(前)/57:1(後) ｜ 高速檔 28:1(前)/30:1(後)
車身尺寸：512 × 240 × 241 mm
軸距幾何：軸距約 313 mm / 底盤離地約 73mm / 橋箱離地約 35mm
攀爬角度：接近角 55度 / 離去角 58度 / 縱向通過角 29度
輪胎配備：1.9 英吋專業高性能攀爬胎 (輪胎尺寸約 110 × 40 mm)
重量規格：車身實重 約 3.0 kg / 全套含包裝彩盒總重 約 4.0 kg
包裝箱尺寸：575 × 275 × 282 mm
📦 包裝內容
☑ 1:10 EX86130 FORD BRONCO 攀爬越野車 × 1 台
☑ 2.4Ghz 多功能專業 6 通道遙控器 (需自備 4 粒 AA/2A 電池) × 1 個
☑ 配件包 × 1 套
☑ 貼紙 × 1 張
☑ 說明書手冊 × 1 本
☑ 彩盒外包裝 × 1 個
⚠️ 注意：官方原廠出廠為 ARTR 版本，不包含遙控車電池及充電器，需自行另購。
⚠️ 玩車溫馨提示
本商品為配備雙速、雙差速鎖與 DIG 系統的專業級高階模型攀爬車（非普通塑料玩具），封閉式金屬齒輪防塵傳動波箱與前後橋結構極為精密。此車專為極限岩石越野、涉水爬坡設計，若在泥地、沙石或溪邊玩車後，請及時清理底盤、懸掛及傳動軸上的泥沙與水氣，並定期為全車 4 隻舵機連桿及金屬齒輪進行保養上油，以維持最佳的攀爬性能。
RGT will launch a new 1/10RTR crawler to market, named"Pro Runner", item number: EX86130. This is a high-performance simulation crawler newly developed by RGT, especially its excellent mechanical properties and perfect appearance. Pro Runner is equipped with following designs: front Structure：and rear straight axles, two-speed gearbox and DIG system, rear axle lock function, freely switch from the front drive mode to four-wheel drive mode, 6% front-rear speed ratio, CNC steel spiral main gear, and reverse transmission system. It also has low axial effect, excellent crossing performance and high durability. "Pro Runner" to the exterior design and interior decoration of Ford Raptor Edition. The other highlights assembled in factory are winch hook function, multi-mode interconnect LED light control, 6-channel 2.4G remote control and "Hobbywing" 60A special electronic speed controller for cralwer.
1. main body adopts hardened stainless steel chassis beam;
2. Integral straight axle comes with caster angle ;
3. 46-degree steering angle and positive Ackerman angle;
4. servo mounted on axel , 25T metal servo arm;
Gear :
1.The front and rear axles use CNC steel spiral gear, which can raise up the front and rear driveshaft and make the chassis of the car have better pass ability;
Transmission System:
1.The front and rear drive shafts are made of #1144 steel CVD structure, and the high-quality bearing with sealing cover is designed for reverse transmission；
2.The front-drive steering driveshaft use steel #1144 CVA material;
1.6mm diameter solid metal 8 connecting rod structure;
2.The ball joint of the linkage rod use reinforced nylon material with a new formula, which is more resistant to friction and deformation.
Deceleration system:
1. Low center of gravity with limited-slip reducer, all metal gears with #45 steel reduction shaft;
2. High-low speed 2 gears switching;
3. Equipped with DIG rear axle locking function, which brings a smaller turning radius for the car and have front-wheels drive function.
The lamp control box with magnet automatic adsorption function is more convenient to assemble and disassemble, which effectively prevents the positive and negative poles from being inserted backwards.
center of gravity for car:
1. "Pro Runner" uses low-center-of-gravity structure in factory, and adopts a weight ratio of 60% for the front wheel and 40% for the rear wheel. Then, the crawler have a larger climbing angle.
2. The weight ratio of the left and right sides is basically balanced, with a larger lean angle.
Other highlights:
1. CNC winch mount, 25KG, 360 degree metal winch servo, winch steel cable can be stretched up to 90CM, supporting the stretching weight up to 15KG.
2. The front bumper adds stainless steel protective plate, which can be realistic and effectively protect the winch servo .
Suspension and wheels:
1. The suspension system adopts CNC aluminum alloy twisted hydraulic shock absorber, which brings more convenient damping adjustment.
2. The wheels are made of butyl rubber, which are 110mm diameter MT tires, coming with two-piece multi-layer 1.9-inch wheel hub for better climbing grip and more realistic.
Electronic Parts:
The "Pro Runner" will be oriented to players in the form of RTR version, equipped with 35T RC550 super-strong torque motor, "Hobbywing" WP-1060 special waterproof electronic speed controller with metal gear for crawler, 25KG all-metal gear waterproof steering servo, ESC can support 2-3S lithium battery mode, and a 6-channel 2.4G remote controller specially designed for this car.
Light control:
1. The lamp control box with magnet automatic adsorption function is more convenient to assemble and disassemble, which effectively prevents the positive and negative poles from being inserted backwards.
2. Standard multi-mode lighting effects, including high beam, low beam, turn signal, parking light, reversing light, flashing light, etc.
3. The colors of car lamps include white light, yellow light and red light.
Bodyshell:
The bodyshell uses PC soft shell material (Raptor version), environmental protection spray paint with transparent windows, hidden body post design, and plastic decorative accessories such as realistic lights, rear view mirrors and door handles. Three colors are available (flame orange, graphite green and sapphire blue).
